Case IH®
Combines - 1420, 1440, 1460, 1470, 1480, 1482, 1620, 1640, 1644, 1660, 1666, 1670, 1680, 1682, 1688, 2144, 2166, 2188, 2344, 2366, 2377, 2388, 2577

Round Baler - 241

Used with Clean Grain Elevator Drive for:
Case IH® Combines - 5088 (ASN Y9G001954), 5130, 5140 (Prior to 10/2015), 6088 (ASN Y9H001954), 6130, 6140 (Prior to 10/2015), 7088 (ASN Y9G001954), 7130, 7140 (Prior to 10/2015)

Used with Incline Auger Drive for:
Case IH® Combines - 5088 (ASN Y9G001954), 5130, 5140 (Prior to 10/2015), 6088 (ASN Y9H001954), 6130, 6140 (Prior to 10/2015), 7088 (ASN Y9G001954), 7130, 7140 (Prior to 10/2015)

224 Links
Size 60H Chain

Case IH® Combines - 7240, 7250, 8240, 8250, 9240, 9250

Case IH® Combines - 5140 (ASN YFG014001), 6140 (ASN YFG014001), 6150, 7140 (ASN YFG014001), 7150

Left Hand Flighting

Overall Length - 81.50"
Shaft Diameter - 1.377"
Tube Length - 77.94"
Flighting Diameter - 3.00"
Flighting Length - 68.75"

Case IH® Combines - 5088, 5130, 5140, 6088, 6130, 6140, 7010, 7088, 7120, 7130, 7140, 7230, 8010, 8120, 9010, 9120, 9230

New Holland® Combines - CR920, CR940, CR960, CR970, CR980, CR9040, CR9060, CR9065, CR9070, CR9080, CR9090

For Incline Auger Liner Repair Sleeve

Case IH® Combines - 5088, 5130, 5140, 6088, 6130, 6140, 7088, 7130, 7140

12-Gauge Steel

Case IH® Combines - 7010, 7120, 7230, 8010, 8120, 8230, 9010, 9120, 9230

12-Gauge Steel

Use with Feederhouse Jackshaft, Left Hand on:
Case IH® Combines - 1420, 1440, 1460, 1480

International® Combines - 615, 715

Use with Grain Delivery Leveling Auger on:
Case IH® Combines - 1660, 1680, 1688, 2144, 2166, 2188, 2366, 2377 (SN 292001-300000), 2388, 2577

Use with Straw Chopper Rotor on:
John Deere® Combines - 3300 (ASN 200000), 4400 (ASN 201251), 4420, 6600 (ASN 206200), 6620, 7700 (ASN 213300), 7720, 8820

Use with Cleaning Fan Shaft on:
John Deere® Combine - 8820

Case IH® Combines - 5130, 5140, 6130, 6140, 7010, 7120, 7130, 7140, 7230, 7240, 8010, 8120, 8230, 8240, 9010, 9120, 9230, 9240, AFX8010

New Holland® Combines - CR920, CR940, CR960, CR970, CR980, CR6090, CR7090, CR8080, CR8090, CR9040, CR9060, CR9065, CR9070, CR9080, CR6.80, CR6.90, CR7.90, CR8.90, CR9.90, CR10.90, CX840, CX860, CX880, CX8070, CX8090, CX8.80, CX8.90

Outside Diameter - 2.838"
Bore Diameter - 1.378"

Case IH® Combines - 7010, 7120, 8010, 8120, 9120

Extended Wear

Length - 72.562"
Shaft Diameter - 1.377"
Tube Diameter - 3.00"