Used with Grain Bin Loading Auger for:
John Deere® Combines - 9450, 9550, 9550SH, 9560, 9560SH, 9560STS, 9570STS, 9650, 9650CTS, 9650STS, 9660, 9660CTS, 9660STS, 9670STS, 9750STS, 9760STS, 9770STS, 9860STS, 9870STS, S550, S650, S660, S670, S670HM, S680, S680HM, S690, S690HM, S760, S770, S780, S790

Used with Grain Tank Bottom Augers for:
Case IH® Combines - 5088, 5130, 5140, 5150, 6088, 6130, 6140, 6150, 7010, 7088, 7130, 7140, 7150, 7230, 7240 (09/2014-08/15), 7250, 8010, 8230, 8240 (09/2014-08/15 and MY18 without Redekop™), 9120, 9230, 9240 (09/2014-08/15 and MY18 without Redekop™), 9250

New Holland® Combines - CR6090, CR7090, CR8080, CR8090 (A3 and A4), CR9080 (A3), CR9090 (Tier 4 12/2011-12/13), CR6.80, CR6.90, CR7.90 (MY15, MY16, MY17, MY18, MY19 and MY20)

Used with Lower Clean Grain Auger for:
Case IH® Combines - 7120, 7230, 7240 (Prior to MY18), 7250, 8120, 8230, 8240, 8250, 9120, 9230, 9240, 9250, AFX8010

New Holland® Combines - CR6090, CR7090, CR8080, CR8090, CR9040 (ASN HAJ111000), CR9060 (ASN HAJ111000), CR9065, CR9070 (ASN HAJ111000), CR9080, CR9090, CR6.80, CR6.90, CR7.80, CR7.90, CR8.90, CR9.90, CR10.90, CX8070 (A3 or A4), CX8080, CX8090 (A3 or A4), CX8.80, CX8.90

Used with Lower Clean Grain Elevator Boot for:
John Deere® Combines - 9450, 9550, 9550SH, 9560, 9560SH, 9560STS, 9570STS, 9650, 9650CTS, 9650STS, 9660, 9660CTS, 9660STS, 9670STS, 9750STS, 9760STS, 9860STS, S550, S650, S660, S760

Used with Lower Active Tailings Elevator Housing for:
John Deere® Combines - S680, S680HM, S690, S690HM, S780, S790

Used with Lower Tailings Return Elevator Housing for:
John Deere® Combines - 9560STS, 9570STS, 9650STS, 9660STS, 9670STS, 9750STS, 9760STS, 9860STS, 9870STS, S550, S650, S660, S670, S670HM, S680, S680HM, S690, S690HM, S760, S770

Used with Outer Unloading Auger for:
Case IH® Combines - 5088, 5130 (21' System), 5140, 5150, 6088, 6130 (21' System), 6140, 6150, 7010 (18' or 21' System), 7088, 7120 (21' System), 7130 (21' System), 7140, 7150, 7230 (21' System), 7240 (21' System Prior to MY18 or Standard Auger for MY18), 7250, 8010 (18' or 21' System), 8120 (21' System), 8230 (21' System), 8240 (21' System Prior to MY18 or Standard Auger for MY18), 8250 (Standard Auger), 9010 (21' System), 9120 (21' System), 9230 (21' System), 9240 (21' System Prior to MY18 or Standard Auger for MY18), 9250 (Standard Auger)

New Holland® Combines - CR920, CR940, CR960, CR6090 (18' System), CR7090 (18' System), CR8080 (18' System), CR8090, CR9040, CR9060, CR9065, CR9070 (Non-Elevation), CR9080 (Non-Elevation), CR9090 (Excluding Elevation 2009-11), CR6.80 (18' System), CR6.90 (18' System), CR7.80 (18' System), CR7.90 (18' System), CR8.90 (D4 with 18' System or All with 19'), CR9.90 (19' System), CR10.90 (19' System), CX8070 (A3 or A4), CX8080, CX8090 (A3 or A4), CX8.80, CX8.90

Used with Upper Clean Grain Elevator Shaft for:
John Deere® Combines - 9450, 9550, 9550SH, 9560, 9560SH, 9560STS, 9570STS, 9650, 9650CTS, 9650STS, 9660, 9660CTS, 9660STS, 9670STS, 9750STS, 9760STS, 9860STS, S550, S650, S660, S670 (BSN 765253), S760

Used with Upper Active Tailings Elevator Shaft for:
John Deere® Combines - S680, S680HM, S690, S690HM, S780, S790

Used with Upper Tailings Return Elevator Shaft for:
John Deere® Combines - 9560STS, 9570STS, 9650STS, 9660STS, 9670STS, 9750STS, 9760STS, 9770STS, 9860STS, 9870STS, S550, S650, S660, S670, S670HM, S680, S680HM, S690, S690HM, S760, S770